Design - Quif Studio

The 3 Most Neglected Steps in Design

April 6, 2020 Mariya Aminu Kabir

When anyone hears the word “architecture” or “architect”, only one word comes to mind. That word is design. The primary function of an architect is to design, and as we all know there are many stages that are taken in the design process before the final product is achieved (2D drawings, 3D drawings, models). In the preliminary stages of any architectural design, there are many things to consider like the site selection criteria, site location, orientation, concept development, zoning, bubble diagrams, space analysis and many more. There is also the specification stage where materials, finishing and construction methods are chosen. All these come together to form the lines drawn on paper (plans, elevations, sections) which will later on become a reality (building/structure). Neglecting any of these steps will have a drastic effect on any design or building. Today, I am going to highlight the 3 most neglected steps in design which are:

Site Analysis
Site Zoning
Specification writing and Detailing

Site Analysis

In the early stages of my training, I used to spend hours making sheets on site analysis and site zoning. I would make them as colorful as possible and draw many diagrams, but the truth was I did not know what half of those things meant. When I was presenting my drawings, I would just say “this is my site analysis showing the analysis of the site”. Thinking of it now makes me laugh honestly because that was just dumb, but towards my final year after doing much reading and going through courses like building climatology, I came to realize what those diagrams actually meant. I even challenged myself into choosing more complex sites as I reached my final year because I knew I could analyze them the right way and make designs that can fit right into the sites. So, how do you do a site analysis the right way? Below is a short guide on how to do a proper site analysis:

Site analysis is done to analyze the existing features of any given site. It has 4 categories which are the geographical features, infrastructural features, climate features and vicinity features.
All categories are to be described in detail. For example, geographical features include the sun path, trade wind directions, orientation, soil type, topography, vegetation, etc. you are to describe each of these in correspondence with your site of choice. These details might vary from different sites, therefore you and your friend using different sites may not have the same description.
It is important to visit your site of choice to help you get more information about the site vicinity and existing infrastructure. For example, google map might show you the structures surrounding the site and those existing on it, but it surely will not give you any source of noise, footpaths, the main direction of wind, etc.
As a student, you can create separate sheets dedicated to each category which will enhance the credibility of your work, while in practice you can explain the value of site visitation and its importance towards producing a better design for the client.

Site Zoning

This is one the easiest yet most neglected steps in design. Zoning is all about knowing where to position certain spaces in a design based on some features that might affect the functionality of the space. These features are accessibility, noise, privacy, and security. Traditionally in training, we draw the shape of the site, include existing roads, and then zone them into 3 parts e.g. most accessible, semi accessible and less accessible, but there is much more to that when it comes to zoning. Zoning falls hand in hand with your bubble diagram. The application of these falls under of two types. There can be a site zoning or site bubble diagram and there is the zoning or bubble diagram for your building. Both are important but they are not the same. The zoning of your site will surely affect the zoning of the main building. For example, a nearby factory may affect your site zoning, which will may result in the positioning of some facilities (e.g. parking) in a certain way. Those facilities may not affect the zoning of your building as parking areas may generate unwanted noise. It is important to pay attention to these details as they can make or break your design.

Specification writing and detailing

I had to reach my final year before I learnt how to make details on my own. Yes, I admit it. It was one of the things I hated doing the most as a student, and if not for a course I took a few months ago during my first year in my master’s program, I think I would have hated it for life. Besides, what is the point of making details? I have never seen a drawing submitted to a client with details and those details being used during construction. What made me realize how important detailing and specification is, was a statement my lecturer once made. He said “What do think made Zaha Hadid or Norman Foster or Frank Gehry the best? Was it because they opened their construction textbooks and copied their roofing details or wall details? Or was it because they studied the existing ones carefully and built on them?”. He explained that details are creations of our own 3D imagination. It tells us how we want a certain member to look like and how that look would be achieved. Sure there are members that are likely to be the same in every design, for example, foundation footing or roof trusses, but sometimes these members can be fabricated to fulfill a certain purpose like insulation, finishing etc.

Specification writing and detailing go hand in hand as you need to specify the materials to be used and how they are going to be used. Lack of specification usually results in wrong choice of materials by someone who might not even have any knowledge of the matter. The wrong type of tiling in a bathroom can result to a person slipping which may lead to serious injury or even death. A simple tip for students on learning specification is to familiar with the materials around you. Know what type of flooring you are walking on, learn how it is made or fabricated, learn whether it is the best option for that specific location, and always ask questions.

It is particularly important to ensure you get all these things right because they highly affect the construction method, choice of materials and even the design as a whole. These are not only neglected by students, but it is quite common to see existing buildings around you that possess various problems not only as a structure but also affects the users of that building. Once the user is not satisfied, the building is considered to be poorly designed.

Thank you for reading, subscribe to my blog and stay tuned for more posts!

Education, Tips and Tricks

How to get the best out of the studio (studio culture)

January 6, 2020 Mariya Aminu Kabir

The studio is a place where imaginations and ideas come to reality, it is a place where ideas are born, where creativity finds its place, it is the sanctuary of the architecture student. To get the most out of it, one must relate with his/her colleagues. The one thing you share in common, which is the most important thing is design. Although, one’s measure of creativity varies by far or less with the other, the main aim is to learn, to learn to share, to experience, to interact, to get comfortable and engage in each and every studio activity.

I remember when I was in school, at the studio there were so many different personalities. Everyone had different taste in almost everything, and design was not an exception. At the beginning, being in the studio was almost boring, but then we began to understand each other, bit by bit, we interacted, we understood our differences, we began to learn from each other, and eventually we became friends with each other. Everything else turned out to be fun. We helped each other, not with our designs only, but with ideas as some of us had better experience at so many things than the others but we learnt the most out of anything together.

The point here is don’t refuse to interact with your colleagues. Don’t isolate yourself from your colleagues, because you’ll miss out on so many things. Here are some tips to get the most out of your studio:

Never fail to learn, engage, and interact.
Learn to plan: make a studio timetable, know the hours to spend at the studio, know when to take a break and let off some steam, know when to continue and when to stop, but never quit.
Learn to make good research, and case study of your design, talk about your ideas with our lecturers.
Do not refuse to improvise, always.
Always have in mind that the design isn’t just about the drawing, it’s important to always learn about the philosophy of the design first, then the process to develop your own idea from it, then the ability to put it down perfectly.
Never refuse to heed to meaningful corrections.
Whenever you think about an idea, put it down on paper.
Take your design seriously, and always make time for it, it should be on your top priority list.
Learn to make neat and presentable sketches, especially of new ideas, or imaginations.
Always go for consultations and make the corrections.
Learn to make a good presentation of your design.
Take good care of your drawing tools/instruments, and do not misuse them.
Lastly, have fun!

These are some few tips (from experience), to make the best out of your studio, and bring out the best in you. Be part of the studio, for it is your home too, it’ll help build and shape your initiative. As they always say, “failing to plan, is planning to fail”. I hope you find this helpful and learn from it.

Stay tuned for more posts like this from Quif Studio. Thanks.

Education, Tips and Tricks

What to expect studying Architecture in Nigeria

December 30, 2019 Mariya Aminu Kabir

Personally, what led me to architecture was the mere thought that it was mainly a combination of mathematics, physics and art. I love mathematics, weird right? I love anything that deals with calculations and experiments. What’s funny is that I was interested in being a medical doctor, but I hated studying. I hated being in front of books for long hours, I would definitely doze off. So, I had to decide and by doing some research I came across architecture. It had the 3 things I loved; mathematics, physics and art (or so I thought).

Architecture is a course that is both a science and an art. Along the four-year journey, courses like history, sociology, psychology, law, geography, engineering, mathematics, and physics are what you would likely encounter. There might be other courses from other related fields such as quantity survey, estate management, urban and regional planning, environmental management, and project management. I know what you’re thinking right now. How are these courses related to architecture? How does one cope with learning all these in just four years? What about design? Well ladies and gentlemen, design is a single course on its own. When you think studying architecture is just about design, trust me you are wrong.

In the first year, you mainly deal with general courses like mathematics and physics which every science student usually takes. There are some basic architecture courses like fundamentals of design, graphic communication, introduction to architecture, sociology for architects, etc.

The second year digs a bit more into the field. Architectural design starts from the second year. Building construction, building material science, history of architecture, building physics (building structures), model making, psychology for architects, environmental management, urban and regional planning are mainly dealt with in this year.

The third year is a bit more practical. As one of my lecturers always likes to say, “Architects are made in level 3”. Design is on a larger and more complex scale. Courses are a bit more realistic and practical. Construction, building structures, building climatology, urban design, building services such as acoustics, ventilation, electrical and mechanical services, fire safety and others, are what to expect.

The fourth year is mainly preparing you for life after graduation, life in the field of practice. Building economics, contract and arbitration, and professional practice are the focus of your final year. Your final year project including a written essay and a design project will mainly be what you are focused on.

I know it might seem a bit overwhelming, and don’t even get me started on the long hours of manual drafting in the studio, model making, the enormous workload, assignments, and presentations. One thing you get to take away from all this apart from achieving your dreams of becoming an architect, is that you get to be part of a family. Your classmates become more than your friends, they become your family. A family made in the studio.

Architecture isn’t only about the career, it changes and shapes your way of thinking, your imagination. It makes you see things better, makes you more observant of your surroundings. It also boosts your initiative and sense of creativity. So, let it flow through you, for it is a lifestyle.